config MSM_CAMERA_SENSOR
	    bool "Qualcomm MSM camera sensor support"
	    depends on MSMB_CAMERA
        ---help---
          This flag enables support for Camera Sensor.
          The sensor driver is capable of providing real time
          data for camera support. The driver support V4L2
          subdev APIs.

config LG_PROXY
        bool "Qualcomm MSM camera proxy support"
        depends on MSMB_CAMERA
        ---help---
        Enable support for proxy sensor for msm camera.
config MSM_CPP
        bool "Qualcomm MSM Camera Post Processing Engine support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Camera Post-processing Engine
          The Post processing engine is capable of scaling
          and cropping image. The driver support V4L2 subdev
          APIs.

config MSM_CCI
        bool "Qualcomm MSM Camera Control Interface support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Camera Control Interface driver only
          for those platforms that have hardware support. This driver
          is responsible for handling I2C read and write on the I2C
          bus. It is also responsible for synchronization with
          GPIO and data frames.

config MSM_CSI20_HEADER
        bool "Qualcomm MSM CSI 2.0 Header"
        depends on MSMB_CAMERA
        ---help---
          Enable support for CSI drivers to include 2.0
          header. This header has register macros and its
          values and bit mask for register configuration bits
          This config macro is required targets based on 8960,
          8930 and 8064 platforms.

# LGE_CHANGE_S: V3 HI351 Camera Bringup - hong.junki@lge.com 2012/09/25
config HI351
	bool "Sensor HI351 (YUV 3M)"
	depends on MSMB_CAMERA
	---help---
	Hynix 3M YUV Sensor
# LGE_CHANGE_E: V3 HI351 Camera Bringup - hong.junki@lge.com 2012/09/25

config MSM_CSI22_HEADER
        bool "Qualcomm MSM CSI 2.2 Header"
        depends on MSMB_CAMERA
        ---help---
          Enable support for CSI drivers to include 2.2
          header. This header has register macros and its
          values and bit mask for register configuration bits
          This config macro is required targets based on 8610
          platform.

config MSM_CSI30_HEADER
        bool "Qualcomm MSM CSI 3.0 Header"
        depends on MSMB_CAMERA
        ---help---
          Enable support for CSI drivers to include 3.0
          header. This header has register macros and its
          values and bit mask for register configuration bits
          This config macro is required for targets based on
          8064 platforms.

config MSM_CSIPHY
        bool "Qualcomm MSM Camera Serial Interface Physical receiver support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Camera Serial Interface
          Physical receiver. It deserializes packets and
          supports detection of packet start and stop
          signalling.

config MSM_CSID
        bool "Qualcomm MSM Camera Serial Interface decoder support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Camera Serial Interface decoder.
          It supports lane merging and decoding of packets
          based on cid which is mapped to a virtual channel
          and datatype.

config MSM_EEPROM
        bool "Qualcomm MSM Camera ROM Interface for Calibration support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for ROM Interface for Calibration
          Provides interface for reading the Claibration data.
          and also provides support for writing data in case of FLASH ROM.
	  Currently supports I2C, CCI and SPI protocol

config MSM_ISPIF
        bool "Qualcomm MSM Image Signal Processing interface support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Image Signal Processing interface module.
          This module acts as a crossbar between CSID and VFE. Output
          of any CID of CSID can be routed to of of pixel or raw
          data interface in VFE.

config MSM_ISPIF_V1
        bool "Qualcomm MSM Image Signal Processing interface support"
        depends on MSMB_CAMERA
        ---help---
          Enable support for Image Signal Processing interface module.
          This module acts as a crossbar between CSID and VFE. Output
          of any CID of MSM_CSI22_HEADER can be routed to of pixel
          or raw data interface in VFE.

config S5K3L1YX
	bool "Sensor S5K3L1YX (BAYER 12M)"
	depends on MSMB_CAMERA
	---help---
		Samsung 12 MP Bayer Sensor with auto focus, uses
		4 mipi lanes, preview config = 1984 * 1508 at 30 fps,
		snapshot config = 4000 * 3000 at 20 fps,
		hfr video at 60, 90 and 120 fps.

config IMX135
	bool "Sensor IMX135 (BAYER 12M)"
	depends on MSMB_CAMERA
	---help---
		Sony 12 MP Bayer Sensor with auto focus, uses
		4 mipi lanes, preview config = 2104 x 1560 at 49 fps,
		snapshot config = 4208 x 3120 at 24 fps,
		Video HDR support.

config IMX111
	bool "Sensor imx111 (Sony 8MP)"
	depends on MSMB_CAMERA
	---help---
		Support for IMX111 sensor driver.
		This is a Sony 8MP Bayer Sensor with autofocus.
		Say Y if the platform uses IMX111 sensor.

config IMX179
	bool "Sensor imx179 (Sony 8MP)"
	depends on MSMB_CAMERA
	---help---
		Support for IMX179 sensor driver.
		This is a Sony 8MP Bayer Sensor with autofocus.
		Say Y if the platform uses IMX179 sensor.

config IMX219
	bool "Sensor imx219 (Sony 8MP)"
	depends on MSMB_CAMERA
	---help---
		Support for IMX219 sensor driver.
		This is a Sony 8MP Bayer Sensor with autofocus.
		Say Y if the platform uses IMX219 sensor.

config HI543
    bool "Sensor hi543 (Hynix 5MP)"
    depends on MSMB_CAMERA
    ---help---
        Support for HI543 sensor driver.
        This is a Hynix 5MP Bayer Sensor with autofocus.
        Say Y if the platform uses HI543 sensor.

config IMX119
	bool "Sensor imx119 (Sony Bayer 1.3MP)"
	depends on MSMB_CAMERA
	---help---
		Support for IMX119 sensor driver.
		This is a Sony 1.3MP Bayer Sensor.
		Say Y if the platform uses IMX119 sensor.

config IMX119G
	bool "Sensor imx119 (Sony Bayer 1.3MP)"
	depends on MSMB_CAMERA
	---help---
		Support for IMX119 sensor driver.
		This is a Sony 1.3MP Bayer Sensor.
		Say Y if the platform uses IMX119 sensor.
		
config IMX134
	bool "Sensor IMX134 (BAYER 8M)"
	depends on MSMB_CAMERA
	---help---
		Sony 8 MP Bayer Sensor with auto focus, uses
		4 mipi lanes full resolution @30fps and
		HFR @60fps and @120fps
		Video HDR support.

config OV2720
	bool "Sensor OV2720 (BAYER 2M)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 2 MP Bayer Sensor, supports 2 mipi lanes,
		preview and snapshot config at 1932 * 1092 at 30 fps,
		hfr video at 60, 90 and 120 fps. This sensor driver does
		not support auto focus.

config OV9724
	bool "Sensor OV9724 (BAYER 2M)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 2 MP Bayer Sensor, supports 2 mipi lanes,
		preview and snapshot config at 1280*720 at 30 fps,
		hfr video at 60, 90 and 120 fps. This sensor driver does
		not support auto focus.

config HI256
        bool "Hynix hi256 (YUV 2MP)"
        depends on MSMB_CAMERA
        ---help---
                OmniVision 8 MP Bayer Sensor with auto focus.uses
                2 mipi lanes, preview config = 1632*1224 30 fps,
                snapshot config = 3264 * 2448 at 18 fps.
                2 lanes max fps is 18, 4 lanes max fps is 24.

config OV5648
	bool "Sensor OV5648 (BAYER 5M)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 5 MP Bayer Sensor, only use 1 mipi lane,
		preview set to 1296*972 at 30 fps,
		snapshot set to 2592*1944 at 12 fps,
		This sensor driver does not support auto focus.

config MT9M114
	bool "Sensor MT9M114 (YUV 1.26MP)"
	depends on MSMB_CAMERA
	---help---
		MT9M114 is Aptina YUV sensor. It supports 1.26 MP preview
		and snapshot. The preview and snapshot resolution shall be
		1280 * 270. It does not support auto focus. It supports
		few special effects like saturation.

config HI707
	bool "Sensor HI707 (YUV VGA)"
	depends on MSMB_CAMERA
	---help---
		HI707 is Aptina YUV sensor. It supports VGA preview
		and snapshot. The preview and snapshot resolution shall be
		640 * 480. It does not support auto focus. It supports
		few special effects like saturation.

config SP1628
	bool "Sensor SP1628 (YUV 720P)"
	depends on MSMB_CAMERA
	---help---
		SP1628 is SuperPix YUV sensor. It supports 720P preview
		and snapshot. The preview and snapshot resolution shall be
		1280 * 270. It does not support auto focus. It supports
		few special effects like mono.

config GC0339
	bool "Sensor GC0339 (BAYER .3M)"
	depends on MSMB_CAMERA
	---help---
		gc0339 is a Galaxycore .3 MP Bayer Sensor.
		It supports 1 or 2 mipi lanes.
		Preview and snapshot resolution shall be 640*480 at 30 fps,
		It does not support auto focus.

config OV8825
	bool "OmniVision OV8825 (BAYER 8MP)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 8 MP Bayer Sensor with auto focus.uses
		2 mipi lanes, preview config = 1632*1224 30 fps,
		snapshot config = 3264 * 2448 at 18 fps.
		2 lanes max fps is 18, 4 lanes max fps is 24.

config OV8865
	bool "OmniVision OV8865 (BAYER 8MP)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 8 MP Bayer Sensor with auto focus.uses
		4 mipi lanes, preview config = 1632*1224 30 fps,
		snapshot config = 3264 * 2448 at 30 fps.
		Max fps is 30fps at 3264 * 2448, 60fps at 1632 * 1224

config s5k4e1
	bool "Sensor s5k4e1 (BAYER 5MP)"
	depends on MSMB_CAMERA
	---help---
		Samsung 5 MP Bayer Sensor. It uses 2 mipi lanes,
		supports 720P preview at 30 fps
		and QSXGA snapshot at 15 fps.
		This sensor driver does not support auto focus.

config OV12830
	bool "OmniVision OV12830 (BAYER 12MP)"
	depends on MSMB_CAMERA
	---help---
		OmniVision 12.8 MP Bayer Sensor with auto focus.uses
		4 mipi lanes, preview config = 2112 * 1500 at 30 fps,
		snapshot config = 4224 * 3000 at 15 fps.
		2 lanes max fps is 18, 4 lanes max fps is 24.

config MSM_V4L2_VIDEO_OVERLAY_DEVICE
	tristate "Qualcomm MSM V4l2 video overlay device"
	---help---
	  Enables support for the MSM V4L2 video
	  overlay driver. This allows video rendering
	  apps to render overlaid video using Video4Linux2
	  APIs, by using /dev/videoX device

config MSMB_JPEG
	tristate "Qualcomm MSM Jpeg Encoder Engine support"
	depends on MSMB_CAMERA && (ARCH_MSM8974 || ARCH_MSM8226)
	---help---
	  Enable support for Jpeg Encoder/Decoder
	  Engine for 8974.
	  This module serves as the common driver
	  for the JPEG 1.0 encoder and decoder.

config MSM_GEMINI
	tristate "Qualcomm MSM Gemini JPEG engine support"
	depends on MSMB_CAMERA && (ARCH_MSM7X30 || ARCH_MSM8X60 || ARCH_MSM8960)
	---help---
	  Enables support for the Gemini JPEG encoder engine for 8x60.

config BACKLIGHT_RT8542
	tristate "Backlight driver for rt8542 visualisation device"
	depends on BACKLIGHT_CLASS_DEVICE
	help
	  To compile this driver as a module, choose M here: the module will be
	  called rt8542 driver.
