#
# Near Field Communication (NFC) devices
#

menu "Near Field Communication (NFC) devices"
    depends on NFC
endmenu

config LGE_NFC
    bool "NFC Device Enabled for LGE"
    default n

config LGE_NFC_PN544_C2
    bool "PN544 C2 NFC driver"
    depends on I2C
    select CRC_CCITT
    default n
    ---help---
      Say yes if you want PN544 Near Field Communication driver.
      This is for i2c connected version. If unsure, say N here.

      To compile this driver as a module, choose m here. The module will
      be called pn544.

config LGE_NFC_PN544_C3
    bool "PN544 C3 NFC driver"
    depends on I2C
    select CRC_CCITT
    default n
    ---help---
      Say yes if you want PN544 Near Field Communication driver.
      This is for i2c connected version. If unsure, say N here.

      To compile this driver as a module, choose m here. The module will
      be called pn544.

config LGE_NFC_PN547_C2
    bool "PN547 C2 NFC driver"
    depends on I2C
    select CRC_CCITT
    default n
    ---help---
      Say yes if you want PN547 Near Field Communication driver.
      This is for i2c connected version. If unsure, say N here.

      To compile this driver as a module, choose m here. The module will
      be called pn547.

config LGE_NFC_PRESTANDBY
    bool "NFC STANBY MODE"
    default n
    ---help---
      Say yes if you want to change a power state of pn544 to stanby mode in Kernel.
      If unsure, say N here.

config LGE_NFC_MULTICORE_FASTBOOT
    bool "NFC MultiThread"
    default n
    ---help---
      Say yes if multi thread is applied for pre-standby.
      If unsure, say N here.

config LGE_NFC_SET_IRQ_WAKEUP
    bool "NFC Set IRQ wakeup when NFC ON"
    default n
    ---help---
      Say yes if Set IRQ Wakeup NFC ON.
      If unsure, say N here.

config LGE_NFC_DEBUG_MESSAGE
    bool "NFC Debug Message"
    default n

config LGE_NFC_HW_QCT_MSM72X7A
    bool "Qualcom MSM72X7A Chipset"
    default n

config LGE_NFC_HW_QCT_APQ8064
    bool "Qualcom APQ8064 Chipset"
    default n

config LGE_NFC_HW_QCT_MSM8960
    bool "Qualcom APQ8960 Chipset"
    default n

config LGE_NFC_HW_QCT_MSM8930
    bool "Qualcom MSM8930 Chipset"
    default n

config LGE_NFC_HW_QCT_MSM8660
    bool "Qualcom MSM8660 Chipset"
    default n

config LGE_NFC_HW_QCT_MSM8255
    bool "Qualcom MSM8255 Chipset"
    default n

config LGE_NFC_HW_TI_OMAP4430
    bool "TI OMAP4430 Chipset"
    default n

config LGE_NFC_HW_NV_AP3X
    bool "Nvidia AP3X Chipset"
    default n

config NFC_PN533
    tristate "NXP PN533 USB driver"
    depends on USB
    help
      NXP PN533 USB driver.
      This driver provides support for NFC NXP PN533 devices.

      Say Y here to compile support for PN533 devices into the
      kernel or say M to compile it as module (pn533).

config NFC_WILINK
    tristate "Texas Instruments NFC WiLink driver"
    depends on TI_ST && NFC_NCI
    help
      This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
      combo devices. This makes use of shared transport line discipline
      core driver to communicate with the NFC core of the combo chip.

      Say Y here to compile support for Texas Instrument's NFC WiLink driver
      into the kernel or say M to compile it as module.


