#
# Near Field Communication (NFC) devices
#

menu "Near Field Communication (NFC) devices"
        depends on NFC
endmenu

config LGE_NFC
        bool "NFC Device Enabled for LGE"
        default n

config LGE_NFC_PN544_C2
        bool "PN544 C2 NFC driver"
        depends on I2C
        select CRC_CCITT
        default n
        ---help---
          Say yes if you want PN544 Near Field Communication driver.
          This is for i2c connected version. If unsure, say N here.

          To compile this driver as a module, choose m here. The module will
          be called pn544.

config LGE_NFC_PN544_C3
        bool "PN544 C3 NFC driver"
        depends on I2C
        select CRC_CCITT
        default n
        ---help---
          Say yes if you want PN544 Near Field Communication driver.
          This is for i2c connected version. If unsure, say N here.

          To compile this driver as a module, choose m here. The module will
          be called pn544.

config LGE_NFC_PN547_C2
        bool "PN547 C2 NFC driver"
        depends on I2C
        select CRC_CCITT
        default n
        ---help---
          Say yes if you want PN547 Near Field Communication driver.
          This is for i2c connected version. If unsure, say N here.

          To compile this driver as a module, choose m here. The module will
          be called pn547.

config LGE_NFC_PRESTANDBY
        bool "NFC STANBY MODE"
        default n
        ---help---
          Say yes if you want to change a power state of pn544 to stanby mode in Kernel.
          If unsure, say N here.

config LGE_NFC_MULTICORE_FASTBOOT
        bool "NFC MultiThread"
        default n
        ---help---
          Say yes if multi thread is applied for pre-standby.
          If unsure, say N here.

config LGE_NFC_SET_IRQ_WAKEUP
        bool "NFC Set IRQ wakeup when NFC ON"
        default n
        ---help---
          Say yes if Set IRQ Wakeup NFC ON.
          If unsure, say N here.

config LGE_NFC_DEBUG_MESSAGE
        bool "NFC Debug Message"
        default n

config LGE_NFC_USE_PMIC
        bool "NFC Using PMIC Clock"
        default n
        ---help---
          Say yes if you want to use PMIC Clock.
          If use XTAL or unsure, say N here.
          Please refer to [NFC-367] for more details.

config LGE_NFC_HW_QCT_MSM72X7A
        bool "Qualcom MSM72X7A Chipset"
        default n

config LGE_NFC_HW_QCT_APQ8064
        bool "Qualcom APQ8064 Chipset"
        default n

config LGE_NFC_HW_QCT_MSM8960
        bool "Qualcom APQ8960 Chipset"
        default n

config LGE_NFC_HW_QCT_MSM8930
        bool "Qualcom MSM8930 Chipset"
        default n

config LGE_NFC_HW_QCT_MSM8660
        bool "Qualcom MSM8660 Chipset"
        default n

config LGE_NFC_HW_QCT_MSM8255
        bool "Qualcom MSM8255 Chipset"
        default n

config LGE_NFC_HW_TI_OMAP4430
        bool "TI OMAP4430 Chipset"
        default n

config LGE_NFC_HW_NV_AP3X
        bool "Nvidia AP3X Chipset"
        default n

config NFC_PN533
        tristate "NXP PN533 USB driver"
        depends on USB
        help
          NXP PN533 USB driver.
          This driver provides support for NFC NXP PN533 devices.

          Say Y here to compile support for PN533 devices into the
          kernel or say M to compile it as module (pn533).

config NFC_WILINK
        tristate "Texas Instruments NFC WiLink driver"
        depends on TI_ST && NFC_NCI
        help
          This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
          combo devices. This makes use of shared transport line discipline
          core driver to communicate with the NFC core of the combo chip.

          Say Y here to compile support for Texas Instrument's NFC WiLink driver
          into the kernel or say M to compile it as module.


config NFC_QNCI
        bool "Qualcomm NCI based NFC Controller Driver for qca199x"
        depends on I2C
        select CRC_CCITT
        help
          This enables the NFC driver for QCA199x based devices.
          This is for i2c connected version. NCI protocol logic
          resides in the usermode and it has no other NFC dependencies.

config LGE_NFC_SONY_CXD2235AGG
        bool "CXD2235AGG NFC driver"
        #depends on I2C && UART
        default n
        ---help---
          Say yes if you want CDX2235AGG Near Field Communication driver.
          This is for i2c & UART connected version. If unsure, say N here.

          To compile this driver as a module, choose m here. The module will
          be called CDX2235AGG.

config LGE_NFC_SONY_KDDI
    bool "CXD2235BGG NFC driver for kddi"
    #depends on I2C && UART
    default n
    ---help---
      Say yes if you want CDX2235AGG Near Field Communication driver.
      This is for i2c & UART connected version. If unsure, say N here.

      To compile this driver as a module, choose m here. The module will
      be called CDX2235AGG.

 config LGE_NFC_SONY_KDDI_EVB
    bool "CXD2235BGG NFC driver for kddi"
    #depends on I2C && UART
    default n
    ---help---
      Say yes if you want CDX2235AGG Near Field Communication driver.
      This is for i2c & UART connected version. If unsure, say N here.

      To compile this driver as a module, choose m here. The module will
      be called CDX2235AGG.

config NFC_BCM43341
        bool "Broadcom 2079X NFC Controller Driver"
        depends on I2C
        select CRC_CCITT
        help
          Broadcom 2079X Near Field Communication controller support.

config NFC_BCM2079X
    bool "Broadcom 2079X NFC Controller Driver"
    depends on I2C
    select CRC_CCITT
    help
      Broadcom 2079X Near Field Communication controller support.
